OR-65HT is a 100% solids spray on bedliner urethane elastomer specifically formulated for high temperature applications while providing excellent abrasion resistance, load release and insulating value. Applied by pouring in place or as spray on bedliners by spraying on blasted and primed truck bodies OR-65HT will provide a seamless, bonded (in-place) liner capable of many years of hard service. The OR-65HT lining system provides the versatility to achieve faster return on your trucking investment.

FEATURES:

-Seamless - no bolts or fastening systems - varying thicknesses to accommodate higher wear areas. -resilient - has crack bridging ability - colors - bonded in place- - insulation value - high temperature resistance to 205 degrees Celsius (400 degrees Fahrenheit) - good load release - leak tight - excellent abrasion resistance - no expansion/contraction effects - chemical resistant - repairable in place - refurbish worn beds - no interload contamination - spray on bedliners

Used by Ingersoll-Rand Blaw Knox in their paving machines.

Hot Asphalt

sand-gravel

riprap-sludge

ore-limestone

silica-coal

waste-salts

dry bulk foods

click pic for a larger version

ORPC 65HT sprayed to 6mm (.250") thickness on sides

Floor sprayed to 12mm (.500") thickness, beavertail to 20mm (0.750")

Hauling fill, dirt and clay up to 12"

click pic for a larger version

Unimin silica truck floor sprayed with ORPC 65HT gray

Handles up to 12" silica

Floor is 6mm (.250") to 12mm (.500") in thickness, front to back

click pic for a larger version

Blaw Knox paving machine sprayed with blue ORPC 65HT for load release

Handles hot asphalt to 177 C (350 F)

Thickness is 3mm (.125") on vertical and 6mm (.250")

click pic for a larger version

Town of Ashford dump truck sprayed with ORPC 65HT black

Side walls sprayed at 3mm (.125") to 6mm (.250") thickness

Floor sprayed at 6mm (.250") to 12mm (.500") thickness

Hauls asphalt, sand, salt and gravel