Trowelable Polyurethane Products
Back to ORPC Coatings Page
These trowelable polyurethane products are designed primarily for the
repair of existing elastomeric substrates such as conveyor belt repair,
pulley lagging repairs, urethane and rubber lining repairs, off-road tire
repair to name a few.
They are 2 part systems that when mixed will become putty-like and can
be applied with a trowel or stiff putty knife.
BR-2T
A two component, 100% solids ether or ester based trowelable polyurethane
with a Shore Hardness of 45/50A for the repair of softer elastomers such
as pure gum rubber.
BR-3T
A two component, 100% solids ether or ester based trowelable polyurethane
designed to repair elastomeric products within an eight hour shift. Shore
Hardness is 75A. Applications include conveyor belt repairs, pulley lagging
repairs and other elastomeric repair work.
BR-5T
A two component, 100% solids ether or ester based trowelable polyurethane
designed to repair elastomeric products but with a longer working potlife
for larger repair applications. Shore hardness is 78A. Applications include
conveyor belt repairs, rubber lining repairs, off-road tire repairs as
well as other elastomeric repairs.
BR-6T
A two component, 100% solids ether or ester based trowelable polyurethane
designed with a Shore Hardness of 90A for use as a repair material on
articles requiring higher hardness. Used primarily to repair existing
urethane linings or parts of similar hardness.
BR-7T
A two component, 100% solids ether or ester based trowelable polyurethane
designed with a Shore Hardness of 95A for use on higher hardness repairs.
Used primarily to repair existing elastomeric linings or parts of similar
hardness.